A new configuration of a compact printed coplanar low pass filter with high rejection
Fouad Aytouna, Jamal Zbitou, Ahmed Lakhssassi and 1 more
e-Prime: Advances in Electrical Engineering, Electronics and Energy · 2022
doi:10.1016/j.prime.2022.100073 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The aim of this contribution is a new study on the achievement, fabrication and the test of a new low pass filter (LPF) coplanar structure based on periodic resonators. The proposed structure can be easly integrated with microwave devices, the validated LPF circuit has a wide band pass and high band stop. The design was done by two electromagnetic (EM) solvers one is based on moment method and the other one on finite integration technique. In order to reach a final LPF structure with good characteristics concerning the insertion loss of−0.8 dB and high attenuation until 15 GHz, the cut-off frequency of this filter is equal to 6,77 GHz. Many series of optimization were conducted using multiple algorithms. The whole area of the validated LPF is16×40 mm2.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.