Not checkedNot checked for notices yet.
Compact quartz-enhanced photoacoustic sensor for ppb-level ambient NO2 detection by use of a high-power laser diode and a grooved tuning fork
Shangzhi Li, Juncheng Lu, Zhijin Shang and 8 more
Photoacoustics · 2022
doi:10.1016/j.pacs.2021.100325 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
A compact quartz-enhanced photoacoustic sensor for ppb-level ambient NO2 detection is demonstrated, in which a high-power blue laser diode module with a small divergence angle was employed to take advantages of the directly proportional relationship between sensitivity and power, hence improving the detection sensitivity. In order to extend the stability time, a custom grooved quartz tuning fork with 800-μm prong spacing is employed to avoid complex signal balance and/or optical spatial filter components. The sensor performance is optimized and assessed in terms of optical coupling, power, gas flow rate, pressure, signal linearity and stability. A minimum detectable concentration (1σ) of 7.3 ppb with an averaging time of 1 s is achieved, which can be further improved to be 0.31 ppb with an averaging time of 590 s. Continuous measurements covering a five-day period are performed to demonstrate the stability and robustness of the reported NO2 sensor system.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.