Skip to content
naulon
Not checkedNot checked for notices yet.

Effect of the sintering temperature on microstructure and optical properties of reactive sintered YAG:Sm3+ ceramics

A.D. Timoshenko, A.G. Doroshenko, S.V. Parkhomenko and 8 more

Optical Materials: X · 2022

doi:10.1016/j.omx.2021.100131 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

YAG:Sm3+ (5 аt.%) optical ceramics were obtained by the solid-state reactive sintering in the 1700–1800°C temperature range. The effect of the sintering temperature on the microstructure, phase composition and optical properties of YAG:Sm3+ ceramics has been studied. It has been shown that the optimal sintering temperature in order to produce YAG:Sm3+ transparent ceramics is 1725°С. The sintered ceramics are characterized by high optical transmittance (>82% at 808 nm), low residual porosity and the average grain size of 21 μm. It has been shown that the sintering temperature has a little effect on the average grain size of synthesized ceramics. Microstructure of YAG:Sm3+ ceramics consolidated at 1800°C is characterized by the presence of large grains up to 90 μm surrounded by the main fraction with an average grain size of 19 μm, which could be evidence of starting bimodal grain size distribution.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.