Impact of residual carbon after DLP and SPS-Sintering on compressive strength and in-VITRO bioactivity of calcium phosphate scaffolds
Claudia Paredes, Jakub Roleček, Lucie Pejchalová and 2 more
Open Ceramics · 2022
doi:10.1016/j.oceram.2022.100281 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Digital Light Processing was used to fabricate bioactive ceramic scaffolds for bone regeneration using β-tricalcium phosphate (β-TCP) powder as a starting material. The 3D structures were de-binded in vacuum and divided in two batches: Carbon Containing samples and Carbon Free samples (obtained by firing at 750 °C in air after de-binding). All samples were then sintered in pressure-less SPS either at 1200 °C or 1500 °C, resulting in two different polymorphs (β and α -TCP). The influence of the de-binding method, the in-situ formation of a carbonaceous phase and different phase composition of resulting scaffolds was evaluated in terms of mechanical performance and in vitro bioactivity and solubility in simulated body fluid (SBF). All scaffolds exhibited compressive strengths within the range of cancellous bone and bone-like apatite precipitates were visible on their surface after 21 days of immersion in SBF, with the exception of carbon-free samples sintered at 1200 °C.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.