Skip to content
naulon
Not checkedNot checked for notices yet.

Mechanical properties of porcelain waste alkali-activated mortar

Rodrigo H. Geraldo, Luiz F.R. Fernandes, Gladis Camarini

Open Ceramics · 2021

doi:10.1016/j.oceram.2021.100184 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Natural sand is extensively used in mortars and concretes as aggregate, and the consumption of this material in construction activities is leading to depletion. This study investigated the use of porcelain waste (PW) that comes from the electrical insulator industry as a replacement of sand in alkali-activated mortar (AAM) production. NaOH and rice husk ash were used to make a sodium silicate which was used as alkali activator, and metakaolin was the aluminosilicate source. Some properties of AAM were evaluated (e.g., workability, compressive and flexural strengths). Results indicated AAM made with PW developed minimum compressive and bond strengths at 28 days of 34 MPa and 1.4 MPa, respectively. PW showed to be a good material to replace natural sand in AAM production, which makes it a feasible alternative to the final disposal of PW generated by electrical insulators industries.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.