Not checkedNot checked for notices yet.
Mechanical properties and electrical discharge machinability of SPS sintered Y-TZP- and YGd-TZP-titanium nitride composites
Aycan Kutlu, Andrea Gommeringer, Frank Kern
Open Ceramics · 2021
doi:10.1016/j.oceram.2021.100093 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Electrical discharge machining (EDM) of ceramics provides an opportunity to manufacture complex shape components from sintered blanks provided the material has a sufficiently high electrical conductivity. In this study yttria and yttria-gadolinia co-stabilized zirconia powders (Y-TZP, YGd-TZP) were produced by intensive co-milling. Fully dense composite ceramics with TZP matrix and 28–32 vol% titanium nitride dispersion were manufactured by spark plasma sintering and subsequently ED-machined by die sinking in oil based dielectric.The materials offer high strength of 1200–1450 MPa coupled with an attractive fracture resistance of 7–7.8 MPa√m. The ceramics exhibit a high electric conductivity of 21–74 kS/m with the highest values observed for the co-stabilized matrix and the higher TiN content. ED machining can be carried out at high machining rates of >1 mm³/min. The dominant material removal mechanism is melting. ED-machining leaves only a very thin glass-like process zone at the surface, the bulk material stays widely unaffected.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.