Skip to content
naulon
Not checkedNot checked for notices yet.

Nickel dot coating of NbC powder by solution processing

Sarmad Naim Katea, Dr., Cheuk-Wai Tai, Dr., Per-Olof Larsson, Dr. and 2 more

Open Ceramics · 2020

doi:10.1016/j.oceram.2020.100043 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

A fast, low cost solution route to nickel dot coated NbC powder using Ni(NO3)26H2O, Ni(OAc)24H2O and triethanolamine (TEA) as precursors in methanol solvent was developed. After mixing the precursor solution with 50–300 ​nm sized NbC powder and evaporation of the solvent, heating to 150 ​°C, or higher, yielded NbC powder evenly covered with well-dispersed nickel metal dots, 6–25 ​nm in size, depending on the nickel loading and temperature. Coatings yielding 4 to 14 ​wt% nickel loading were studied at temperatures from 200 to 700 ​°C, using TG-DTA, XRD, SEM, XPS with Ar+-ion etching, TEM/DF, and STEM/HAADF/EDS.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.