Skip to content
naulon
Not checkedNot checked for notices yet.

Control of deformation and annealing process to produce incoherent Σ3 boundaries in Hastelloy C-276 alloy

Xiao-yu Zhang, Jun Zhong, Sheng-li Guo and 1 more

Nuclear Materials and Energy · 2021

doi:10.1016/j.nme.2021.100944 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Hastelloy C-276 samples were cold-rolled with their thickness reduction of 7.5% and 15%, and then annealed at 1100 °C for 5–60 min in solid solution. The grain boundary character distributions (GBCDs) were characterized by a technique of electron back scatter diffraction (EBSD). Results indicated that, more convoluted Σ3 boundaries (i.e. incoherent Ʃ3 boundaries) are generated by reasonable annealing time in low strain (7.5%) sample during strain-induced boundary migration (SIBM) processing. They can induce higher Ʃ3n fraction and activate more interactions between special boundaries for GBE. Instead, more coherent Ʃ3 boundaries were produced by moderate strain (15%) and annealing treatment with the occurrence of static recrystallization (SRX). The recrystallized fine grains possess fewer incoherent Ʃ3 boundaries cannot promote to get more multiple twinning for optimization of GBCD. Therefore, reasonable deformation and annealing treatment parameters lead to more incoherent Ʃ3 boundaries would play an important role in the optimization of GBE.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.