Skip to content
naulon
Not checkedNot checked for notices yet.

Effects of F3+ ion implantation on the properties of W and W0.5(TaTiVCr)0.5 for depth marker-based plasma erosion analysis

Owais Ahmed Waseem, Kevin Benjamin Woller, Faris Bassam Sweidan and 1 more

Nuclear Materials and Energy · 2020

doi:10.1016/j.nme.2020.100806 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The irradiation resistance of tungsten (W) and a high-entropy alloy-based material W0.5(TaTiVCr)0.5 was analysed using depth marker implantation (F3+ ions irradiation). Mirror-polished W and W0.5(TaTiVCr)0.5 samples were exposed to 5.0 MeV and 4.2 MeV, respectively, F3+ ions up to a maximum fluence of 3.2x1012 ions/cm2. The scanning electron and atomic force microscopy of implanted W showed nanostructured features and pinholes, respectively, whereas the surface of implanted W0.5(TaTiVCr)0.5 remained fairly smooth. The nanoindentation hardness of W and W0.5(TaTiVCr)0.5 increased from 6.6 GPa to 8.5 GPa and from 13.9 GPa to 16.3 GPa, respectively, due to implantation. The ion implantation induced lattice defects and compressive stress, as a result, the BCC peaks of W and W0.5(TaTiVCr)0.5 moved to higher Bragg angles. The irradiation induced strain in W0.5(TaTiVCr)0.5 (4.4x10-4) remained lower than that in pure W (8.5x10-4). The comparison of W and W0.5(TaTiVCr)0.5 suggested the higher resistance of W0.5(TaTiVCr)0.5 to high energy ion implantation.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.