Skip to content
naulon
Not checkedNot checked for notices yet.

One-step manufacturing process for neodymium-iron (magnet-grade) master alloy

Prabhat K. Tripathy, Kunal Mondal, Amey R. Khanolkar

Materials Science for Energy Technologies · 2021

doi:10.1016/j.mset.2021.07.001 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Neodymium iron boron magnet has registered heightened demand due to its rapidly increasingly application in the clean energy sector. These magnets are manufactured by melting the mixture, consisting of neodymium, iron and boron followed by casting into ingots. The ingots are subsequently pulverized to powder, which, in turn, is sintered and magnetized to form the permanent magnet. An alternative approach is the controlled addition of boron to the neodymium iron master alloy to fabricate the magnet. The present process discusses an alternative and novel electrochemical approach to prepare the neodymium-iron master alloy, directly from the mixed oxides of neodymium and iron, in just one step. The mixed oxide pellet was cathodically polarized in a pool of molten calcium chloride in the temperature range 800–950°C, against an oxygen-evolving anode. The reduced alloy could not only retain its original structure but also exhibited magnetic behavior.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.