Skip to content
naulon
Not checkedNot checked for notices yet.

Influencing the contact angle during brazing by direct laser interference structured textures on the substrate surface

Robert Baumann, Stefan Heilmann, David Köberlin and 2 more

Materials Letters: X · 2022

doi:10.1016/j.mlblux.2022.100129 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Direct Laser Interference Patterning (DLIP) is used to generate textured stainless steel surfaces to control the wettability of a liquid nickel-based brazing alloy. The interference of two laser beams leads to periodic line-like structures with a spatial period of 6.0 µm. A maximum structure depth of 2.0 µm is reached by controlling the processing parameters. Moreover, the generation of laser induces periodic surface structures (LIPSS) with a period of ∼ 800 nm is observed on top of the DLIP structures. Depending on the produced texture depth, the contact angle of the molten metal is increased from 13° up to 96°. This allows adjusting the contact angle for various brazing and soldering applications and can also be used as a filler metal stop.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.