Not checkedNot checked for notices yet.
The 20 N⋅m dynamic torque calibration device at PTB
Leonard Klaus, Michael Kobusch
Measurement: Sensors · 2022
doi:10.1016/j.measen.2022.100370 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Research in the field of dynamic torque calibration has gained some momentum in the last few years. At PTB, a calibration device for small dynamic torque levels up to about 0.5 N⋅m proved the working principle of dynamic torque calibrations with sinusoidal excitation. In a next step, a new calibration device was developed with the intention of generating higher dynamic torque levels in the range of up to 20 N⋅m. Although this is still less than many industrial applications require, it could pave the way to higher torque levels. The new calibration device features a horizontal arrangement of all components of the drive shaft. The device consists mostly of industrial components that have been modified, rather than custom-made components. After commissioning, optimising the device enabled a frequency range from 10 Hz to up to 400 Hz with dynamic torque amplitudes of up to 20 N⋅m.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.