Skip to content
naulon
Not checkedNot checked for notices yet.

Multifunctional composite phase change materials with CNTs/SiC-modified epoxy coating for synergistically enhanced solar energy storage and photothermal conversion

Meng Fu, Youchong Hu, Shuai Luo and 3 more

Materials & Design · 2025

doi:10.1016/j.matdes.2025.114569 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Developing multifunctional composite phase change materials (PCMs) featuring enhanced photothermal energy conversion and storage performance is of vital importance, yet traditional organic PCMs suffer from inherent drawbacks, including leakage and poor thermal conductivity throughout the phase change process. To solve this problem, a new PCM design is provided, where stearic acid (SA) was employed as a latent heat storage unit, and carbon foam (CF) was served as a supporting framework. In this design, CNTs/SiC composite nanoparticles were uniformly dispersed into epoxy resin (ER) to fabricate a photothermal conversion coating. The modified epoxy resin (MER) coating acted as a protective effect for the internal PCMs, effectively mitigating leakage during phase transitions. With the incorporation of 9 wt% CNTs/SiC, the prepared composite PCMs retained the high latent heat (143.5J⋅g−1) and excellent photothermal conversion efficiency (96.76 %). Furthermore, the latent heat of the material showed a minimal reduction of only 0.4 % following 200 thermal cycles. These results demonstrate the potential of composite PCMs for efficient solar energy harvesting and storage in thermal regulation systems.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.