Skip to content
naulon
Not checkedNot checked for notices yet.

Mg effect on the cryogenic temperature toughness of Al-Mg alloys

Kwangtae Son, Michael E. Kassner, Tae-Kyu Lee and 1 more

Materials & Design · 2022

doi:10.1016/j.matdes.2022.111336 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In this study, the Mg and temperature effects on cryogenic impact toughness of Al-Mg alloys are investigated. Cryogenic Charpy impact tests are conducted for several Al-Mg alloys: AA5083 (=reference), Al-6 Mg, Al-8 Mg, and Al-8.5 Mg. The temperature range is – 196 ˚C to 100 ˚C. In all Al-Mg alloys, the impact toughness is improved at higher temperatures. The Al-6 Mg alloy exhibits the largest impact toughness, whereas the lowest impact toughness is observed in AA5083 over the temperature range. Beyond the Mg content of 6 wt%, the impact toughness of Al-Mg alloys decreases with increasing Mg. The planar anisotropy (Δr) is low in Al-Mg alloys of higher impact toughness. The largest amounts of coarse inclusions (>10 µm) are present in the AA5083, providing favorable cracking sites and thereby its poor impact toughness. The grain size and intergranular Mg segregation do not appear to influence the toughness of Al-Mg alloys. Weaker texture in the most ductile Al-6 Mg appears beneficial to gain more homogeneous deformation and lower Δr. Brass {110} 〈112〉, S {123} 〈634〉, and Copper {112} 〈111〉 textures evolve at the expense of a Goss {110} 〈001〉 weakening by increasing the Mg level. This texture evolution illustrates the toughness degradation of Al-Mg alloys of higher Mg levels.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.