Skip to content
naulon
Not checkedNot checked for notices yet.

Three-dimensional printable metamaterial intramedullary nails with tunable strain for the treatment of long bone fractures

Ali Mehboob, Hassan Mehboob, Yasir Nawab and 1 more

Materials & Design · 2022

doi:10.1016/j.matdes.2022.110942 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Novel metamaterial unit cells with tunable strain were incorporated into titanium intramedullary (IM) nails to overcome problems of dense metallic implants. Three-dimensional (3D) models of cylindrical, pillar, and reference metamaterials were tuned and analyzed for structural authentication. Further, one solid IM nail (S0) and four different cylindrical metamaterial cell IM nails with gap sizes of 0.15 mm, 0.30 mm, 0.45 mm, and 0.60 mm were used to achieve 5% (S1), 10% (S2), 15% (S3), and 20% (S4) strain, respectively, in a 3-mm fracture, to investigate the healing outcomes. The bending stiffness (callus quality) in the S2 metamaterial IM nail increased by 22% between the 7th and 16th iterations, whereas for the S0, S1, S3, and S4 IM nails, the increases were 5.6%, 8.1%, 12.4%, and 9.0%, respectively. The S2 IM nail exhibited the best healing and bending stiffness; however, the S0 IM nail exhibited the worst results. This unique design was customized for different fracture gap sizes according to patient-specific needs.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.