Non-equilibrium solidification behavior associated with powder characteristics during electron beam additive manufacturing
Yufan Zhao, Huakang Bian, Hao Wang and 3 more
Materials & Design · 2022
doi:10.1016/j.matdes.2022.110915 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
For components built by powder bed fusion with electron beam (PBF-EB), the resulting microstructure arising from non-equilibrium solidification, microsegregation and the formation of interdendritic phases significantly affects the material properties. Notably, the powder characteristics influence the heat absorption and conduction, thereby altering the molten pool behavior and solidification parameters. However, the effect of the powder feedstock on solidification during PBF has not been widely investigated. In this study, a CoCrMo alloy was fabricated using powders prepared by gas-atomization (GA) and plasma rotating electrode process (PREP). Under the given operating conditions, samples built using the two powders were characterized and compared. By performing multi-scale numerical simulations, melting and solidification were visualized and analyzed to elucidate the mechanism through which the powder characteristics influence the non-equilibrium solidification behavior during PBF-EB. The study revealed that after appropriate size control, compared with the GA powder, the PREP powder had a smaller specific surface area and higher sphericity; thus, the generated powder layer exhibited higher heat absorption and dissipation rates. Therefore, a high solidification rate was facilitated, thereby suppressing microsegregation. These findings contribute to PBF knowledge related to feedstock, proving to be an essential reference for selecting and optimizing metallic powders applicable to additive manufacturing.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.