Skip to content
naulon
Not checkedNot checked for notices yet.

Develop a new strain rate sensitive solid-state pressure bonding model

Yaping Wang, Yuehan Liu, Jing-Hua Zheng and 2 more

Materials & Design · 2022

doi:10.1016/j.matdes.2022.110436 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Solid-state bonding is widely involved in metal forming and joining applications. The quality of the bonded interface is the key to the final integrity of the joint or formed structure; thus, its controllability and predictivity have been the focus over decades. The interface bond quality is jointly determined by the interface oxide behaviour and microstructure evolution. In this study, a new four-stage model, considering the cohesion of different contacting pairs (oxide-oxide, oxide-metal and metal–metal) and the reduced adverse effect of remaining oxides, is proposed to describe the bonding process under hot deforming conditions. This proposed model was validated through a range of hot compression bonding tests, using Gleeble under different strains (10%, 30% and 50%), strain rates (0.001 s−1, 0.01 s−1 and 0.1 s−1) at 1150 °C with references. Scanning electron microscope (SEM) and Electron Backscatter Diffraction (EBSD) were used to characterize the oxide behaviour and microstructure evolution. Tensile tests at room temperature were conducted on bonded samples and references to reveal the interface bond ratio. 100% bonding strength, equivalent to the base metal's strength and ductility, was achieved at the large strain of 50% for all three strain rates.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.