Skip to content
naulon
Not checkedNot checked for notices yet.

Air atmosphere diffusion bonding of Al–Mg–Li alloy using Cu nano-coating interlayer: Microstructural characterization and formation mechanisms

Yongkang Liu, Guofeng Wang, Yuqing Chen and 6 more

Materials & Design · 2022

doi:10.1016/j.matdes.2022.110431 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The process of diffusion bonding in air was successfully used to join 5A90 Al–Mg–Li alloy, which can greatly reduce the welding cycle and equipment requirements. Before diffusion bonding, the Cu nano-coating prepared on the surface of Al–Mg–Li alloy by ultrasonic electrodeposition was used as interlayer to hinder the formation of oxide film and increase the atomic diffusion. The effects of coating thickness, diffusion temperature and interlayer types on the microstructure and performance of joints were investigated. When the diffusion temperature was 530 °C and the coating thickness was 5.12 μm, the optimal shear strength of the joint with 1 μm-thick diffusing interface was 187.9 MPa, which was 90.6% of that in base metal. As the decomposition of unstable Li20Mg6Cu13Al42, Cu atoms diffused into the Al matrix to precipitate Al6CuMg4, and enhanced nano-MgO phase was formed in situ. In addition, the element diffusion behavior and formation mechanisms of the joints were discussed in detail.

Abstract licence: CC BY-NC

References50

    40 more references, whose wording the paper’s licence keeps private.

    All 50 references

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.