Skip to content
naulon
Not checkedNot checked for notices yet.

An optimisation method for the cold-spray process: On the nozzle geometry

L. Alonso, M.A. Garrido, P. Poza

Materials & Design · 2022

doi:10.1016/j.matdes.2022.110387 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Currently, the cold-spray process, or simply cold spray, is an extensively used technique in coating applications. The low temperature of the deposition process is the distinctive feature that makes it suitable for many additive manufacturing activities such as repair and restoration of damaged components. The reliability of the coatings is strongly dependent on the velocity of the powder during its impact on the target surface. Spraying conditions such as the pressure and temperature of the carrier gas and the geometry of the nozzle control the acceleration of the powder particles. Consequently, there is an increasing interest in the optimisation of nozzle geometry so as to maximise the acceleration of the particles through the nozzle path that they follow. In contrast with various extant approaches to achieve this aim (finite element modelling, experimental approach, and analytical methods), an alternative model based on the one-dimensional isentropic theory that accounts for the dynamics of the dilute two-phase flow was developed in this study. First, an analysis of the common hypotheses used to obtain the equation of motion of the particle was carried out. Subsequently, with the new insights revealed from the previous analysis, a new theoretical model for the optimisation of the divergent part of the nozzle was performed considering a geometric angle restriction. This model is based on the numerical integration of the equation of motion of the particle, ensuring the maximisation of the particle drag force by means of the Lagrange multiplier method. Once the analytical model is formulated, a set of curves describing the optimal geometric parameters for different conditions is obtained. Moreover, some optimal geometries are presented demonstrating the low influence of the angle restriction. Additionally, the inversely proportional relationship between stagnation pressure and temperature is revealed.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.