Skip to content
naulon
Not checkedNot checked for notices yet.

Electrical resistance flash sintering of tungsten carbide

Isacco Mazo, Alberto Molinari, Vincenzo M. Sglavo

Materials & Design · 2022

doi:10.1016/j.matdes.2021.110330 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This work explores the possibilities for the ultrafast sintering of binderless tungsten carbide by electric/pressure assisted sintering. A limited voltage (3–4 V) in AC condition was applied to WC powder compact in combination with uniaxial pressure. The thermal insulating ceramic die allows the ultrafast heating (104 °C/min) of the powder compact which undergoes a rapid transition of its electrical properties, from negative to positive dependence of resistivity on temperature, i.e. from NTC to PTC behaviour. Such effect is fundamental for inducing a thermal runaway phenomenon associated with ultrarapid temperature increase and massive electric power dissipation, thus inducing very rapid sintering. The relationship between electrical properties of tungsten carbide and the possibility to achieve “flash sintering” conditions to complete densification in a couple of seconds was investigated. At the optimal conditions of 3.5 V and 4 MPa pressure, pure WC sinters up to 95% in less than 10 s. Longer sintering time after the flash improves only slightly the density, despite a significant energetic consumption. It is also shown that if larger pressure is applied, the flash event duration and final density decrease.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.