Skip to content
naulon
Not checkedNot checked for notices yet.

Bioinspired damage tolerant diamond-metal laminates by alternating CVD and PVD processes

Timo Fromm, Sebastian Bruns, Marie-Christin Müller and 4 more

Materials & Design · 2022

doi:10.1016/j.matdes.2021.110315 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In this study, we present a novel process to fabricate diamond-metal laminates. By means of successive chemical vapor deposition and physical vapor deposition processes, the lamellar material is deposited layer by layer on silicon wafers. Laminates consisting of two, five and ten layers of diamond were realized. In addition, fabrication of diamond-based, biomimetic brick-and-mortar structures was successful for the first time. For this purpose, diamond layers of a five-layer laminate were structured by laser cutting into hexagonal platelets with diameters of 400 µm and 800 µm. The mechanical behavior was characterized by three-point bending. Mostly spontaneous failure with little crack deflection was observed, indicating a strong diamond-metal interface. At over 1250 MPa, the laminates exhibit nominal strengths that exceed those of other lamellar ceramic-metal composites by at least a factor of two, while fracture energy lies in a medium range. The laminates with segmented diamond layers exhibit damage tolerance.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.