Skip to content
naulon

Not checkedNot checked for notices yet.

Micromachining of Al2O3 thin films via laser drilling and plasma etching for interfacing copper

Gül Dogan, Frank Chiu, Sam U.H. Chen and 7 more

Materials & Design · 2021

doi:10.1016/j.matdes.2021.110114 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Due to their chemical inertness and high-temperature stability, atomic layer deposited (ALD) oxide thin films emerged as an attractive copper encapsulation, passivation, and protection technology. Several types of high-k dielectrics, which are robust insulators, can be deposited by ALD. Hence, a successful encapsulation process electrically isolates the underlying film and active elements from the environment, as a side effect. To electrically interface such encapsulated structures, a reliable method that selectively and locally removes the encapsulation film is required. Here, the study focused on the effectiveness of laser drilling and plasma etching of Al2O3 thin films deposited via ALD, both in silico and experimentally. Results have shown that the CO2 laser drilling alone is insufficient to remove the Al2O3 thin films. However, plasma etching successfully removes the encapsulation layer, providing a clean interface for conductive vias. Results are essential for future ALD layer applications in the encapsulation of copper and other critical components in semiconductor fabrication processes.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.