Skip to content
naulon
Not checkedNot checked for notices yet.

Additive manufacturing of shape memory alloys: A review with emphasis on powder bed systems

Ali N. Alagha, Shahadat Hussain, Wael Zaki

Materials & Design · 2021

doi:10.1016/j.matdes.2021.109654 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The ability of shape memory alloys (SMAs) to recover inelastic strains larger than any other metallic alloy has prompted their use in a wide range of applications. However, for the most common SMAs, including NiTi and Cu-based systems, fabrication using conventional means raises important challenges, including poor workability and potentially high tool wear. Additive manufacturing offers a direct answer to these challenges by eliminating the need for tooling and allowing the production of samples of complex geometries directly from computer-aided designs. The present work provides a comprehensive review of additive manufacturing applied to various SMA systems, with focus on the influence of process parameters and heat-treatment on the microstructure, printability, and the structural and functional behavior of additively fabricated samples.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.