Isotropic octet-truss lattice structure design and anisotropy control strategies for implant application
Jiawei Feng, Bo Liu, Zhiwei Lin and 1 more
Materials & Design · 2021
doi:10.1016/j.matdes.2021.109595 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In the field of bone implantation, there is a large demand for isotropic lattice with appropriate mechanical properties and porosity. Two isotropic lattice structure design and anisotropy control strategies are proposed in this work. The first way to acquire isotropic lattice structures is to combine the cross-frustum with octet-truss structure. Then the anisotropy can be adjusted by changing the frustum parameters. The second strategy is implemented in the space of normal lattice to generate hierarchical structures to achieve lattice anisotropy control by changing the inner and outer diameters. In virtue of homogenization method and finite element analysis (FEA), the relationship between elastic modulus, anisotropy and lattice parameters can be established. Based on that, the lattice structures with required elastic modulus and isotropy can be obtained. In addition, the isotropic lattice structures acquired by these two methods are applied as acetabular cup implant in this work. Compared with normal octet-truss, experimental results validate that the elastic modulus of designed lattice implant fluctuates significantly smaller. The standard deviation of elastic modulus in different directions is reduced by about 80%.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.