Preparation of hybrid chitosan membranes by selective laser sintering for adsorption and catalysis

The processing method of natural polymers is one of the critical factors affecting their application. As commonly used biomass, chitosan was usually shaped by a wet chemical method which dissolves chitosan in a solvent and then fabricated into the membrane, fiber or other forms. This process often needs a large number of solvents and acids, which are harmful to the environment. In this paper, we mixed chitosan powder and thermoplastic polyurethane to form membrane by selective laser sintering. This method has advantages of simple operation, fast membrane formation, and low preparation cost. No solvents were applied in the whole progress. The hybrid membrane had an adsorption performance for heavy metal ions, the maximum adsorption capacities to Cu(II) and Pb(II) reached 19.6 mg g−1 and 30.4 mg g−1, respectively. Palladium ions could also be adsorbed by the membrane to form palladium-loaded composite materials, which could be used as a catalyst for reducing p-nitrophenol, and the conversion rate could reach 96% in 20 min. Keywords: Laser sintering, Chitosan membrane, Adsorption, Reduction p-nitrophenol

Abstract licence: CC BY-NC

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.