Skip to content
naulon
Not checkedNot checked for notices yet.

Effect of Al content on microstructure and microhardness of Inconel 718 superalloy fabricated by laser additive manufacturing

Wenjun Zhang, Fenggang Liu, Fencheng Liu and 4 more

Journal of Materials Research and Technology · 2022

doi:10.1016/j.jmrt.2021.12.127 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In this study, the effect of Al addition on the microstructure and microhardness of Inconel 718 superalloy fabricated by laser additive manufacturing (LAM) was studied. The addition of Al had little effect on the grain morphology and orientation, but the segregation of Nb element intensified with the increase of Al content, which promoted the formation of Laves phase in the inter-dendritic region. After HSDA (Homogenization + Solution + Double aging) heat treatment, the precipitation of δ phase at grain boundaries changed from cross needle-like to the rod-like, and at the same time, the more content of Al was added, the more rod-like δ phase formed inside the grains. Besides, the addition of Al can promote the precipitation of γ′ phase, and inhibit the precipitation of γ'' phase through promoting the segregation of Nb element. When 5% wt.% Al was added, only γ′ phase was precipitated in the matrix. With the increase of Al content, the microhardness of as-deposited LAMed Inconel 718 increased and reached 325 HV when 5% wt.% Al was added. For microhardness of heat-treated samples, it showed the similar evolution trend with the increase of Al content.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.