The application of model equation method in preparation of titanium foams
Xiao Jian, Liu Yongning, Li Yong and 2 more
Journal of Materials Research and Technology · 2021
doi:10.1016/j.jmrt.2021.04.051 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The model equation method (MEM) is a new method to measure the porosity of porous materials. This paper demonstrates the application value of the MEM in the preparation of titanium foams from an experimental point of view. The results showed that the porosities calculated by the MEM were in the range of 0.533–0.701 with the spacer contents between 0.55 and -0.75. The measured values were highly consistent with those of the mass volume method, which indicates that the MEM was feasible to measure porosity. The correlation equation between porosity and spacer content has a very high prediction accuracy by a linear fitting. The elastic modulus and yield strength of titanium foams were 4.8–29 GPa and 10.2–101.1 MPa, respectively. The relative elastic modulus and relative yield strength were directly proportional to the n-th power of relative density through a nonlinear fitting. The mathematical correlations between relative mechanical properties and spacer content were established. This study not only proves that the new method of porosity measurement has an important application value, but also realizes the source control of mechanical properties of titanium foams.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.