Manganese-modified lignin biochar as adsorbent for removal of methylene blue
Xu-Jing Liu, Ming-Fei Li, Sandip K. Singh
Journal of Materials Research and Technology · 2021
doi:10.1016/j.jmrt.2021.03.076 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Methylene blue, a prevalent cationic type dye, has been extensively utilized in textile industry. Lignin generates as a byproduct and its utilization is required to add a potential economic benefit of a biorefinery process. Lignin-derived porous biochar, as a promising adsorbent, was propitiously prepared by chemical modification with different oxidation number manganese compounds (KMnO4, MnSO4, and MnO2). The adsorption capacity of MnO2-loaded biochar to methylene blue dye was substantially higher relative to original biochar. The maximum adsorption capacity was 248.96 mg/g and removal rate was 99.73%, as compared to 234.65 mg/g and 94.0% for unmodified biochar. In comparison, the decolorization rate of the modified biochar exceeded 95%.Substantial results showed that methylene blue has a strong binding affinity with MnO2 modified biochar. Adsorption kinetics was described by a quasi-second order model and methylene blue adsorption isotherm was better fitted by Langmuir model. The research provides a promising way for the removal of methylene blue from wastewater through the manufacture of adsorbent from byproduct of biorefinery process.
Abstract licence: CC BY-NC-ND
References69
40 more references, whose wording the paper’s licence keeps private.
All 69 referencesReads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.