Vacuum brazing ZSCf composite ceramics to TC4 alloy with Ag-Cu filler
Wei Wang, Yaping Liu, Gang Wang and 2 more
Journal of Materials Research and Technology · 2020
doi:10.1016/j.jmrt.2020.05.119 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In this study, the carbon fiber reinforced ZrB2-SiC composite ceramic was joined to Ti6Al4V alloy with Ag-Cu eutectic alloy filler at varied holding time and a fixed temperature of 800℃. Interface microstructure and shear strength of brazing joints were studied. The brazed ZSCf ceramics/AgCu/TC4 alloy is endowed with good metallurgical bondings. A typical interfacial structure of joints brazed for 10 min was found as ZSCf/TiC/Ti5Si3/Ag(s,s)/Cu(s,s) + TiC/TiCu/Ti2Cu/(TiC + TiCu)/TC4 alloy. Increase of holding time did not vary the precipitated phase of the joints but decreased thickness of the Ag(s, s) and Cu(s, s) reaction layer and gradually thickened the Ti-Cu reaction layer near the TC4 side. The formation process of reaction products was discussed in detail. The holding time substantially influenced shear strength of the joints. A maximum shear strength of 39 MPa was reached at a brazing time of 20 min.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.