Purification of crude selenium by vacuum distillation and analysis
Guozheng Zha, Yunke Wang, Minqiang Cheng and 4 more
Journal of Materials Research and Technology · 2020
doi:10.1016/j.jmrt.2020.01.043 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In this study, metallurgical grade crude selenium (99.4%), comprehensively recovered from copper electrolysis anode slime, was purified to 99.992% through triple consecutive vacuum distillation (TCVD) on a laboratory scale. The actual evaporation rate and accommodation coefficient α of crude selenium were found to be 0.0231 g cm−2 min and 0.3236, respectively, at 523 K and approximately 4 Pa by a vacuum thermogravimetric furnace. Internal heat vacuum distillation equipment was employed in the purification experiments with a dynamic vacuum level of approximately 4 Pa. Detailed analysis of the initial and purified selenium was performed using inductively coupled plasma mass spectrometry (ICP-MS) to identify the 15 most common impurity elements. The analysis confirmed the reduction in the total impurity content from 2997.38 ppmw to <79.08 ppmw. The microscopic impurity elemental distribution was analyzed using an electron probe microanalyzer (EPMA), and it shows that the impurities were relatively concentrated and gathered in crude selenium. The results enrich the database of selenium evaporation kinetics and lay a foundation for the industrial purification of selenium.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.