Skip to content
naulon
Not checkedNot checked for notices yet.

Porous process and its effects on the microstructure and properties of SiC ceramics sintered with Mg additive

Jingkun Li, Xueping Ren, Yanling Zhang and 1 more

Journal of Materials Research and Technology · 2020

doi:10.1016/j.jmrt.2019.10.026 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Seeing that opinions vary, no unanimous conclusion has been drawn on mechanisms of SiC sintered with Mg additive. In this work, SiC porous ceramics were sintered at 1300 °C/30 MPa for 2 h and 6 h. The X-ray diffractometer (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), were used to study the microstructure and mechanism, relative density and mechanical properties were tested. Results show that relative density and most of the mechanical properties decreased with prolongation of sintering time, while hardness increased. M2C3 forms during sintering and has a pinning effect on the boundary between SiC and Mg. Both SiC and M2C3 are strong bonded with Mg with coherent boundary. The mechanism of microstructure evolution has been discussed. Keywords: Ceramics, Sintering, Microstructure, Transmission electron microscopy, TEM

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.