Investigation on the electrospun PVDF/NP-ZnO nanofibers for application in environmental energy harvesting

PVDF is one of the most widely used dielectric polymers that has four phases. Among them, only its β phase shows piezoelectric property, which is accessible through an electrospinning synthesis method. In this research, a solution of dimethylformamide (DMF) and tetrahydrofuran (THF), with different ratios, and two different polymer concentrations, as well as various ZnO percentages, were used for synthesis of PVDF/NP-ZnO nanofibers composite. The samples that led to the formation of nanofibers were characterized. The results indicate that nanofibers were appropriately formed at lower concentrations of polymer and zinc oxide with equal ratio of the two solvents. To study the effects of synthesis conditions on the morphology and diameter of the nanofibers, the samples were synthesized at different intervals and at different injection rates. The results show that at lower intervals, the injection rate should be reduced to form more uniform nanofibers without nodes and sprays. Finally, flexible piezoelectric nanogenerators were fabricated based on the best samples and were tested under vibrational mechanical forces. The results indicate a maximum output power of 32 nW/cm2. The greater output current and voltage were resulted by using more uniform and stretched nanofibers. Keywords: Nanofibers, PVDF, ZnO, Electrospinning, Nanogenerator

Abstract licence: CC BY-NC

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.