Not checkedNot checked for notices yet.
Characteristics inversion of underground goaf based on InSAR techniques and PIM
Hongdong Fan, Tengteng Li, Yantao Gao and 2 more
International Journal of Applied Earth Observations and Geoinformation · 2021
doi:10.1016/j.jag.2021.102526 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The nature of coal mining areas, such as private exploitation, illegal exploitation, is not only a waste of a large amount of coal resources, but is also very likely to cause geological problems such as surface collapse and cracks. However, existing supervision methods are mostly in the form of mass report, on-site inspection, and geological exploration, which are not suitable for underground goaf detection in large-scale non-target areas. Therefore, this paper presents a method for locating and inversion of underground goaf based on a combination of interferometric synthetic aperture radar (InSAR) techniques and a probability integral model (PIM). Firstly, the Line-of-Sight deformation of the subsidence basin above goaf generated by combining InSAR and Offset-Tracking algorithm is taken as the real land subsidence. Then, according to the obtained surface deformation, the initial ranges of eight goaf locational parameters are determined, and the correlation function between the surface deformation and the location of underground goaf is constructed. The Oppositional-based Learning Chaotic Bat Algorithm (OLCBA) is used to search the optimal parameters to satisfy the minimum error between the ground deformation calculated by PIM and the Line-of-Sight deformation obtained by SAR. Therefore, the optimal parameters are considered as the characteristics of underground goaf. The simulation results show that the maximum relative error appears in the dip angle of the inversed parameters of the goaf location, which is 3.70%. Taking a known working face of the Daliuta coal mine as the test object and 11 TerraSAR-X images as the data sources, the land subsidence is obtained and compared with GPS measurements, then the underground mining characteristics of the working face is successfully retrieved. Although the maximum relative error of the dip angle is 81.5%, the absolute error is only 1.63° and the relative errors of the other main parameters are less than 15.03%.
Abstract licence: CC BY-NC-ND
References20
20 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.