Skip to content
naulon
Not checkedNot checked for notices yet.

A case study on the introduction of an advanced ship inspection method: Gross tonnage measurement 3D point clouds

Byung-Hwa Song, Bon-Yeong Park, Dong-Kun Lee

International Journal of Naval Architecture and Ocean Engineering · 2025

doi:10.1016/j.ijnaoe.2025.100677 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This study examines the feasibility of gross tonnage (GT) measurement using 3D point cloud technology as a digital alternative to traditional manual methods. While ships over 24 m follow standardized regulations under the 1969 Tonnage Measurement Convention (TMC), those under 24 m are subject to diverse national rules, often based on simplified formulas. In this study, 3D point clouds were acquired using laser scanners for two Korean vessels—a government-owned ship over 24 m and a fishing vessel under 24 m. After post-processing, the enclosed volume was estimated using a convex hull algorithm and compared with GT values calculated under national standards. The point cloud-based method showed minimal variation, with a maximum difference of 0.30 % in volume and 0.23 TON in GT. These results indicate that 3D scanning provides a reliable and accurate alternative for GT measurement and offers potential for broader institutional adoption through standardized digital workflows.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.