Skip to content
naulon
Not checkedNot checked for notices yet.

Hydrodynamic characteristics of cambered NACA0012 for flexible-wing application of a flapping-type tidal stream energy harvesting system

Patar Ebenezer Sitorus, Jin–Soon Park, Jin Hwan Ko

International Journal of Naval Architecture and Ocean Engineering · 2019

doi:10.1016/j.ijnaoe.2018.04.003 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In recent years, nonlinear dynamic models have been developed for flapping-type energy harvesting systems with a rigid wing, but not for those with a flexible wing. Thus, in this study, flexible wing designs of NACA0012 section are proposed and measurements of the forces of rigid cambered wings, which are used to estimate the performance of the designed wings, are conducted. Polar curves from the measured lift and drag coefficients show that JavaFoil estimation is much closer to the measured values than Eppler over the entire given range of angles of attack. As the camber of the rigid cambered wings is increased, both the lift and drag coefficients increase, in turn increasing the resultant forces. Moreover, the maximum resultant forces for all rigid cambered wings are achieved at the same angle of attack as the maximum lift coefficient, meaning that the lift coefficient is dominant in representations of the wing characteristics. Keywords: Flapping-type energy harvesting system, Flexible wing, Cambered rigid wing, Wing characteristics, NACA0012

Abstract licence: CC BY-NC-ND

References10

    10 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.