Not checkedNot checked for notices yet.
Experimental and numerical investigation into rectangular tube extrusion of high-strength magnesium alloy
Shengwen Bai, Gang Fang
International Journal of Lightweight Materials and Manufacture · 2020
doi:10.1016/j.ijlmm.2019.11.001 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In order to reduce weight in air and ground vehicles, hollow magnesium alloy profiles are widely concerned. This research was aimed to extrude the tubes of newly developed high-strength alloy Mg–Al–Zn-RE by the porthole die. The magnesium alloy tubes with rectangular sections were extruded at the conditions optimized through the finite element simulations of extrusion processes. The microstructure observation indicated that the magnesium alloy underwent complete dynamic recrystallization (DRX) during the hot extrusion. Moreover, plenty of fine particles dynamically precipitated from the magnesium matrix were distributed on the grain boundaries. Undergoing the dramatical evolution of microstructure, the fine grains and particles significantly strengthened the extruded magnesium alloy. The tensile test demonstrated that extruded tubes possessed maximum ultimate tensile strength 406 ± 7 MPa and elongation 21.8 ± 1.0% at the optimal extrusion parameters. Keywords: Magnesium alloy, Tube extrusion, Finite element simulation, Mechanical properties
Abstract licence: CC BY-NC-ND
References28
28 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.