Effect of NiTi content and test temperature on mechanical behaviors of NiTi–PU composites
Xingke Zhao, Tao Chen, Shufan Wang
International Journal of Lightweight Materials and Manufacture · 2018
doi:10.1016/j.ijlmm.2018.09.003 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
For purpose of developing damping materials with increased damping capacity over a wide band, NiTi–PU composites were fabricated by vacuum molding polyether polyurethane melt with NiTi alloy chips additive. The composites were tested using three-point bending at various testing temperatures. Appreciable improvements were observed in bending modulus and load-deflection hysteresis loops of PU matrix. The bending modulus and hysteresis loop area of a composite with 70% NiTi volume content reach a maximum, which are 5.4 times and 5.6 times higher than those of PU matrix, respectively. The mechanism of bending modulus enhancement of NiTi additive was discussed. Keywords: Nitinol, Polyurethane, Composites, Bending modulus, Hysteresis loop
Abstract licence: CC BY-NC-ND
References7
7 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.