Skip to content
naulon
Not checkedNot checked for notices yet.

A new method for characterization of small capacity wind turbines with permanent magnet synchronous generator: An experimental study

A. Verde, O. Lastres, G. Hernández and 3 more

Heliyon · 2018

doi:10.1016/j.heliyon.2018.e00732 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This work presents a new and useful method to dimension wind turbines and control systems and to optimize their mechanical design. This method allows determining the principal curves for characterizing a small capacity wind turbine designed with a Permanent Magnet Synchronous Generator (PMSG). For the wind turbine characterization it was considered the losses in the process of energy transformation in the wind rotor, electric generator and in the bridge rectifier. The equivalent electric model of the synchronous generator was used to determine the electric parameter performance. The work of the wind rotor was considered in its maximum power curve and the PMSG performance in the linear region of its magnetization curve. This leads to develop a new methodology for the complete wind turbine characterization from the nominal parameters of the wind rotor and the electric generator. This method also allows obtaining the power curves and the parameters of voltage, current and efficiency around the wind speed domain and angular speed in the wind rotor. The method was tested for small-capacity wind turbine (1 kW and 10 kW) performances and the numerical and experimental results are described.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.