Integration of a photoelectrochemical cell in a flow system for quantification of 4-aminophenol with titanium dioxide

The photoelectrochemical quantification of phenolic compounds such as hydroquinone (HQ) and 4-aminophenol (4-AP) is accomplished by integrating a photoelectrochemical cell into a flow injection analysis (FIA) setup.It is a well-known fact that during the electroanalysis of phenolic compounds, the electrode surface is susceptible to poisoning.However, electrode fouling can be reduced significantly by using the FIA system with periodic washing of the electrode.Reactive oxygen species (ROS), which are generated on the surface of TiO 2 under UV light, can oxidize phenolic compounds such as 4-AP.The oxidized form of 4-AP is reduced back at the electrode surface, generating a measurable signal proportional to its concentration.The factors influencing the performance of the sensor, such as flow rate, applied potential for back reduction and pH, are investigated in detail.In the concentration range 0.0125-1.0µM, a linear correlation between the photocurrent and the concentration of 4-AP was observed with a sensitivity of 0.6 A M -1 cm -2 and a limit of detection of 18 nM.A straightforward analytical methodology for the on-site, highly sensitive and low-cost quantification of phenolic compounds is presented, based on the use of TiO 2 in a photoelectrochemical flow cell.

Abstract licence: CC BY-NC-ND

47 more references, whose wording the paper’s licence keeps private.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.