Skip to content
naulon
Not checkedNot checked for notices yet.

Design of electromagnetic induction calculation and auxiliary calculation software under UHV transmission line

Bo Yang, Ranran Wang

Energy Reports · 2021

doi:10.1016/j.egyr.2021.09.151 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

With the development of 1000 kV UHV transmission technology and the shortage of line corridor resources, UHV will inevitably cross the building area. Although many scholars had studied the power frequency electromagnetic field under UHV AC transmission line, it is very difficult to accurately calculate the electric field strength and induced voltage, which cannot be applied in engineering. At present, there is no relevant literature to study the problem of induced electricity in buildings with a large number of steel frame structures under the line and the estimation method of induced electricity in buildings. By summarizing and analyzing the simulation data, the estimation method of induced voltage and induced current density of steel frame buildings under UHV lines was proposed. An auxiliary calculation system was developed. The calculated values of the software were compared with the measured values, which accuracy of voltage and current can reach 91.5% and 92.7%, and fully meet the engineering needs.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.