Design and experiments of double-switch electromagnetic pulse welding system
Zhigang Liao, Chengxiang Li, Jian Du and 3 more
Energy Reports · 2020
doi:10.1016/j.egyr.2020.11.091 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Limited by the current capacity of the discharge switch, the amplitude of the circuit discharge pulse current of electromagnetic pulse welding (EMPW) system is at a relatively low level, which greatly limits the application range of the EMPW technology. In this paper, the trigger vacuum switch (TVS) was selected as the discharge switch, and the double-switch synchronous conduction scheme was proposed. Based on two 20 kV/28 kJ single-switch electromagnetic pulse generation modular, a 20 kV/56 kJ double-switch electromagnetic pulse system was designed, which could generate a pulse current with the amplitude peak value of 360 kA when the charging voltage was 16 kV. Finally, the effective welding of 1 mm Mg/Al alloy plates was realized.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.