Barriers facing Micro-encapsulated Phase Change Materials Slurry (MPCMS) in Photovoltaic Thermal (PV/T) application
Samir Ali, Mahmud Mustafa
Energy Reports · 2020
doi:10.1016/j.egyr.2020.11.012 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Photovoltaic generation is a temperature-dependent technology, with each 1 °C temperature rise of the PV module, the efficiency drops by 0.2–0.5 % depending on the material of the PV cells. MPCM slurry is employed in the study to work as a cooling medium that circulates through a serpentine pipe to absorb heat from the back of a (0.8m x1.6m) 1.28 m2 PV module for cooling purpose. The paper presents the experimental rig, the procedure of using MPCM slurry in PV/T and the limitations to its application. The experiments run under specific laboratory conditions with three concentrations of MPCM (5%, 10%, and 15%) in the slurry to test the effect of the major parameters such as radiation, Reynolds number and the concentration of the MPCM in the slurry on the performance of the system. The results showed that the system achieves 83% overall efficiency and 5.9 coefficient of performance (COP) when it operates with 10 % MPCM concentration slurry. Despite the good experimental outputs, the system is facing some problems that impede its application mostly due to the complexity of the cooling medium (MPCMS).
Abstract licence: CC BY-NC-ND
References8
8 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.