Skip to content
naulon
Not checkedNot checked for notices yet.

Innovative solutions to improved sound insulation of CLT floors

Fredrik Ljunggren

Developments in the Built Environment · 2023

doi:10.1016/j.dibe.2022.100117 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Building with cross laminated timber (CLT) has gain increased interest over the last years, but in common to other wood-based building systems, inadequate low-frequency sound insulation is seen as a problem. This paper deals with two methods to improve the sound insulation of CLT panels, normally made from spruce: 1) heavy CLT, introducing compressed, i.e. densified, spruce as well as alternative wood species, and 2) elastic layer based upon shear motion. In addition to a series of laboratory measurements, a full-scale CLT floor made of two 60 mm birch panels with a 12 mm elastic layer in between was tested in a two-room test mock-up. The results from the acoustical measurements showed that the floor has about 7 dB greater airborne and impact sound insulation for one-third octave bands, 50–3150 Hz, compared to a standard CLT floor of the same total height.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.