Skip to content
naulon
Not checkedNot checked for notices yet.

Vapor-liquid equilibrium (VLE) measurements of ethanol – heptane at isothermal (363.15, 393.15 and 423.15 K) and isobaric (101.33 kPa) conditions and correlation of liquid viscosity data

Tomoya Tsuji, Hiroyuki Matsuda, Makoto Kawakita and 2 more

Chemical Thermodynamics and Thermal Analysis · 2022

doi:10.1016/j.ctta.2022.100041 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Vapor-liquid equilibria (VLE) were measured for ethanol – heptane by a modified Rose-Williams equilibrium still combined with ebulliometer at three isotherms (363.15, 393.15 and 423.15 K) and an isobar (101.33 kPa). The azeotropes were observed in VLE, and the experimental data were correlated with the Peng-Robinson-Stryjek-Vera (PRSV) equation of state. The conventional mixing rule, with kij equal to zero calculates the azeotropic pressure close to the vapor pressure of ethanol. The Adachi-Sugie (AS) mixing rule provides 0.282% average absolute relative deviation (AARD) in temperature for isobaric VLE and 1.711% AARD for isothermal VLE. Eyring theory combined with the PRSV equation enabled an average of 2.810% AARD in correlation of literature liquid viscosity data, which is sufficient for considering biofuel injector. The method will be applied to flow analysis in general process design using mixtures because viscosity can be evaluated from equation of states.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.