Skip to content
naulon
Not checkedNot checked for notices yet.

Three-dimensional pore-scale simulation of non-equilibrium in a two-layer porous burner

Yang Liu, Yangbo Deng, Junrui Shi and 3 more

Case Studies in Thermal Engineering · 2022

doi:10.1016/j.csite.2022.102101 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

A pore-scale numerical simulation for combustion of methane-air mixtures in a two-layer porous media burner made of staggered arrangement of connected particles is preformed. Combustion is modeled by a one-step reaction mechanism, and solid surface radiation heat transfer is computed by discrete ordinates (DO) model. The bridge approach is used to deal with the point contact between adjacent particles. The present study is intended to investigate the non-equilibrium characteristics of gas velocity and temperature under two operating parameters such as the inlet velocity and equivalence ratio. A comparison of the numerical values and experimental values was carried out to prove the effectiveness of numerical model, and a good agreement is shown. The results showed considerable non-equilibrium of velocity and temperature along the space coordinate due to the inhomogeneous porous structure. The extent of flow non-equilibrium increases as inlet velocity and equivalence ratio are increased. The extent of gas temperature non-equilibrium decreases slightly with the inlet velocity, but the equivalence ratio effect on thermal non-equilibrium can be neglected.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.