Performance analysis and optimization of a steam ejector through streamlining of the primary nozzle
Wenxu Sun, Xiaojing Ma, Yuanmin Zhang and 2 more
Case Studies in Thermal Engineering · 2021
doi:10.1016/j.csite.2021.101356 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
A steam ejector uses high-pressure vapor as the power for operating in steam cycles. The ejector geometry and pressure of the motive flow significantly influence its performance. Here, a steam ejector used in a distilled water preparation system for medical injection was numerically studied to improve its performance under insufficient motive source, in the meantime, to guarantee its high efficiency under the designed motive pressure of 6.0 bar. Owing to the temporary insufficiency of the motive pressure of around 4.5 bar in a specific time period, the most convenient and inexpensive approach was to fine-tune the primary nozzle and replace it with no further changes in the ejector structure. Fifteen streamline nozzle profiles were established and the performance effect of the different structures is discussed. The entrainment ratio of the ejector with a streamlined nozzle could reach up to 19.79% and 8.04% higher than the original one under the motive pressures of 4.5 and 5.5 bar, respectively. In addition, their performance was similar under a designed motive pressure of 6.0 bar. The proposed ejector extends the high efficiency operating range of the on-site steam ejector and the results may contribute to the streamline ejector design.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.