Skip to content
naulon
Not checkedNot checked for notices yet.

Utilization of wastewater sludge for lightweight concrete and the use of wastewater as curing medium

K.S. Mojapelo, W.K. Kupolati, J.M. Ndambuki and 2 more

Case Studies in Construction Materials · 2021

doi:10.1016/j.cscm.2021.e00667 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The increasing population have resulted in a higher generation of domestic and industrial wastewater sludge. The sludge ends up as a landfill in designated areas which makes the land unusable. The search for lightweight materials for construction has led to the use of sludge as a viable replacement for the basic composition of concrete due to its low density. The dry sludge collected from Polokwane Waste Water Treatment Works (WWTW) in Limpopo Province was used as a partial replacement of sand in concrete. The sludge content in the sand was varied from 2.5, 5, 7.5, 10, to 12.5 %. The outcomes of the analysis indicate that the partial replacement of sand with dry sludge in the concrete mix is viable and useful. The result showed that up to 7.5 % of sand could be replaced with dry sludge in concrete for structural applications. Also, wastewater can be used as a curing medium. The unit weight of the concrete decreased with increasing sludge content, which was attributed to the lower density of the sludge. The SEM image revealed a porous nature and irregular surface morphology of the sludge and the concrete.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.