Steel scale waste as component in mortars production: An experimental study
Erika Furlani, Stefano Maschio
Case Studies in Construction Materials · 2016
doi:10.1016/j.cscm.2016.02.001 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The present research reports on the results of some experiments dealing with the recycling of steel scale waste in the production of mortars. Materials were prepared mixing a commercial CEMII/B-LL cement, a steel scale waste, a commercial natural aggregate, superplasticizer and water. Natural aggregate was replaced with different proportions (5, 10, 20, 30 and 40 wt%) of steel scale waste. Water absorption, apparent density, compression strength and thermal conductivity were measured after 28 d of curing. After curing, all hydrated materials displayed: good compressive strength and low water absorption; increased apparent density with steel scale addition; improvement of thermal conductivity in materials containing up to 10 wt% steel scale addition.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.