ctDNA and CTCs in Liquid Biopsy – Current Status and Where We Need to Progress

1Almost 150 years ago in 1869, the pathologist Thomas Ashworth provided evidence for the presence of circulating tumor cells (CTCs) in the blood of a metastatic cancer patient and, therefore, described for the first time a phenomenon nowadays considered as liquid biopsy. Different analytes can be identified in patient blood samples: circulating rare cells (such as CTCs, progenitor and mature endothelial cells or tumor-educated platelets), circulating cell-free DNA (ccfDNA, especially circulating tumor DNA, ctDNA), circulating cell-free RNA (ccfRNA) or extracellular vesicles (exosomes) and their cargo (including nucleic acids and proteins). Other blood components recently introduced as blood-based biomarker sources, like exosomes or platelets, but are beyond the scope of this review which will focus on ctDNA and CTCs. All these analytes can be used to increase our knowledge about the underlying disease (e.g. tumor burden and heterogeneity) ultimately translating into improved cancer diagnosis, therapy guidance and disease surveillance. To do so, several biological and technological challenges need to be overcome. In particular, standardized pre-analytical sample handling procedures as well as not yet available robust and reproducible workflows for the molecular analysis of liquid biopsy samples are desperately needed.

2The concept of liquid biopsy aims at simple, fast and cost efficient monitoring of disease status or response to treatment. Here, liquid biopsy offers several advantages compared to “conventional” tissue biopsy: Liquid biopsy is less burdensome than a tissue biopsy, because body fluids like blood, saliva or urine are much easier to access. For some diseases such as lung cancer taking a tissue biopsy is clinically often not possible, e.g. due to a high risk of bleeding, nerve injury or disease spreading. Moreover, tissue biopsies may not appropriately reflect the complex molecular profile of a primary tumor, because of its intratumoral or spatial heterogeneity, which can only be addressed by taking biopsies from different tumor areas. Compared to this, liquid biopsies may offer a more comprehensive cross-section of heterogeneous diseases. Furthermore, liquid biopsies may also provide insights into the molecular drivers of different primary tumors or metastases, which may significantly differ in the same patient. Since the genome of tumor cells is often highly unstable and susceptible to changes under different selective pressures (e.g. therapy) liquid biopsy may allow longitudinal disease surveillance to monitor developing tumor heterogeneity. Overall, the liquid biopsy concept complements the personalized medicine approach and provides an innovative way for patient selection in clinical trials, here mutational analysis supports patient eligibility for targeted therapy.

3Most therapy decisions in the clinic are based on laboratory tests. This testing process can be divided into three phases: the pre-analytical phase, the analytical and the post-analytical phase. While the pre-analytical phase includes the identification and selection of an appropriate test, specimen collection and transport, the analytical phase comprises mainly the laboratory testing itself. The post-analytical phase consists of, for example, data analysis, interpretation of results and reporting, but also - if applicable - archiving of the remaining material. In the whole testing process, 46% to 68% of errors occur in the pre-analytical phase, which adversely influence the quality of the data in the following phases, leading to an increase of diagnostic costs and suboptimal or even wrong treatment decisions for the patient. The most common mistakes include the selection of inappropriate tests, the use of inappropriate blood collection tube (BCT), poor sample collection procedures (e.g. hemolysis or insufficient volume) or wrong sample storage and transportation but also inaccurate sorting, aliquoting or technical mistakes (e.g. pipetting or centrifugation). As a result, about 10% of patient deaths and 17% of adverse events are reported to be caused by such pre-analytic mistakes. Due to the high relevance of preanalytical sample handling, significant efforts have been made to standardize processing and analysis of blood samples for different technologies. For example, van Ginkel and colleagues assessed a technical workflow to use highly sensitive Droplet Digital PCR (ddPCR) to detect rare mutational targets by analyzing ctDNA. They used blood samples from healthy donors and lung cancer patients to compare methods, protocols of sample collection, storage, centrifugation, isolation and quantification. They received, for example, highest cfDNA concentrations from serum tubes with most consistent results by using the QIAamp Circulating Nucleic Acid Kit. Others performed comparative studies on extraction methods and analysis platforms, also for other liquid biopsy biomarkers like miRNAs. The results of these studies corroborate that the outcome of an assay is highly dependent on multiple factors during the preanalytical sample workflow, which has to be taken into account for effective implementation of an assay in clinical practice.

4This underlines the need to optimize pre-analytical handling also in the field of liquid biopsy. Therefore, various efforts are currently being made to establish best practice in the field, including the European FP7 consortium SPIDIA4P (Standardization and improvement of generic Pre-analytical tools and procedures for In-vitro DIAgnostics, http://www.spidia.eu/). Among the aims of SPIDIA4P are the stabilization, handling and study of biomolecules in liquid biopsies and tissues.

5Regarding clinical utility of liquid biopsy as well as usefulness for research, it is very important to have easy-to-use, robust and reproducible workflows. Currently, there are no integrated, multicenter-tested workflows available covering the requirements for the clinical setting. Such workflows should include Standardized Operating Procedures (SOPs) for all above mentioned phases of laboratory testing starting with specimen collection and ending with result interpretation e.g. via bioinformatics analysis. Blood collection should be performed using certified BCTs, suitable for the respective downstream application (e.g. use of compatible stabilizer or fixative, volume adjusted). Next, fixed established protocols for specimen handling, storage and shipping of the blood sample or how to generate blood plasma (e.g. centrifugation) are indispensable. Depending on the analyte (CTCs, ctDNA, miRNA, etc.), robust extraction, isolation and quantification methods, are necessary. The implementation of an optimized preparation method for each analyte at the analytical sites has to be validated and documented for evaluation of the results. Multicenter comparisons of downstream read-out technologies (e.g. massive parallel sequencing for ctDNA or fluorescence-based quantification for rare cells) are also of key importance. Although many different liquid biopsy technologies appeared on the market in recent years, there is still a lack of technologies offering reproducible, robust, cost-effective and easy-to-use workflows from the sample to clinically meaningful data. To this day, there is only one FDA approved CTC quantification technology available for three metastatic tumor indications: the CellSearch system (Menarini Silicon Biosystems, Inc.). For the detection of EGFR mutations in NSCLC patients a ctDNA based test received approval by the FDA in 2016 (https://www.fda.gov/Drugs/InformationOnDrugs/ApprovedDrugs/ucm504540.htm).

6Public private partnerships have been initiated focusing on standardization of methods and technologies for the analysis of circulating nucleic acids and rare cells. The Innovative Medicines Initiative (IMI) program CANCER-ID (www.cancer-id.eu) is supported by financial contributions from the European Union‘s Seventh Framework Programme (FP7/2007-2013) and EFPIA (European Federation of Pharmaceutical Industries and Associations) companies’ in-kind contributions. Key deliverables of the consortium are the evaluation of technologies for blood-based biomarker analysis and establishment of criteria for benchmarking different technologies. This includes best practice recommendations for sample collection, protocols for specimen storage and shipment allowing bio- banking, as well as comparative data on different methods for the molecular analysis of CTCs, ctDNA and miRNAs. Ultimately, CANCER-ID aims to provide a basis for the use of blood-based biomarkers in multi-centered clinical trials. Another public-private partnership, the US based Blood Profiling Atlas in Cancer (BloodPAC) consortium (https://www.bloodpac.org/), has recently been established with the goal to support the development of liquid biopsy technologies in cancer research. BloodPAC is systematically collecting and harmonizing data from public and private research efforts utilizing CTC, ctDNA and some other analyte classes such as exosomes. This data is subsequently shared between the different stakeholders to identify best practice procedures.

7The comprehensive evaluation of several different technologies as well as integration of these technologies in multicenter clinical studies is a tremendous effort, which is not easily feasible for a single pharmaceutical or academic institution. Programs such as CANCER-ID aim to accelerate the development of emerging technologies by defining end-user requirements. The demand for readily accessible (i.e. longitudinal) predictive data to support patient selection, to detect early signs of efficacy or to monitor the development of resistance towards targeted therapies in phase 2 and 3 clinical studies, a promise of liquid biopsy, makes such consortia attractive for the pharmaceutical and diagnostic industries.

8Finally, world-wide availability of technologies and the regulatory approval of liquid biopsy devices and technologies have to be ensured.

9In the following chapters an overview of some more widely used technologies to analyze liquid biopsy analytes such as rare cells or circulating nucleic acids will be provided.

10Rare cells are generally considered low abundant cells in the blood stream, typically with a concentration below 1 in 105 cells. Circulating mature endothelial cells (CECs), which are potential biomarkers for endothelial dysfunction in cancer, diabetes, cardio-vascular or acute kidney diseases have been observed with a frequency of 10–100 CECs in 106–108 white blood cells, depending on the method of enrichment and detection. Compared to that, the estimated frequency of CTCs is even lower, ranging from 1 to 10 CTCs in 106–108 white blood cells. Therefore, the detection, quantification and isolation of single cells are challenging.

11The potential of rare cells as blood-based biomarkers, especially CTCs, is underlined by many publications showing their clinical relevance. CTCs are considered to be the main source of metastases. Moreover, the number of CTCs in the blood correlates with reduced progression-free and overall survival and is of higher prognostic value than conventional imaging. A big hurdle for further downstream analysis of CTCs is an efficient and reliable method for isolating these cells. Several technologies have been developed to separate rare cells in the blood from the extraordinarily high background of normal blood cells, mainly erythrocytes and leukocytes. Enrichment, separation or quantification of rare cells can be done either by physical properties like cell size, density or deformability and/or biological properties of the cells (e.g. marker gene expression on the cell surface). The size of CTCs ranges from 4 μm to 50 μm. Furthermore, CTCs are described to be more rigid than hematopoietic cells. Detection and enrichment of CTCs based on their biological properties such as surface marker expression strongly depends on the availability of the respective antibody. This is further complicated by the potentially dynamic nature of marker expression, best exemplified in the case of CTCs undergoing Epithelial-to-Mesenchymal Transition (EMT).

12Gradient-based centrifugation (e.g. using a Ficoll gradient) is the easiest method to enrich for a specific cell type with a certain density. However, this result in an erythrocyte-depleted peripheral blood mononuclear cell fraction that requires further processing (e.g. cytospins) to allow staining for CTC marker expression. More recently, improved devices have been developed that integrate and automate some of these processing steps, e.g. the Rarecyte system.

13Filtration enables enrichment of rare cells based on cell size. Examples are VyCAP-or ISET-filtration, which has been used successfully to isolate CTCs from lung and prostate cancer in clinical studies. In comparison with the only FDA cleared CTC quantification system – CellSearch – a higher CTC positivity in lung cancer (80% vs. 23%) and prostate cancer (100% vs. 90%) was shown. Since the CellSearch system enumerates cells that express the epithelial marker EpCAM, these differences suggest that there are additional CTC subpopulations or CTC-like cell types lacking EPCAM expression. Based on recovery rates using tumor cell lines spiked into blood Coumans and colleagues suggest the use of filter material made out of a stiff, flat material, which is biocompatible and does not interact with any blood components e.g. triggering clotting.

14Another CTC enrichment principle is using microfluidics, which allows separation of CTCs from other blood components at a constant flow. In comparison to filtration methods, microfluidic systems allow to harvest a CTC-enriched cell suspension for downstream analysis such as immunofluorescent labelling for single cell isolation. This is usually not readily achieved in a gentle and destruction-free manner with filtration systems due to the relatively tight binding of the cells to the filtration matrix during the pressurized filtration process. To overcome this, some technology providers are developing solutions to punch out the cells from well-shaped filter pores (e.g. VyCAP filters). Further examples for more widely used microfluidic devices are the Parsortix device, the ClearCell® FX1 or the Vortex trapping system.

15CTCs and possibly other rare cells can also be separated based on differences in their electrical charge. Here, levitation due to di-electrophoretic (DEP) forces as well as hydrodynamic lift forces are applied to a cell suspension which is situated at a constant flow. This removes the vast majority of white blood cells (WBCs) to enrich the tumor cell fraction. This principle of combining density and electric charge is realized by e.g. ApoStream system.

16For the enrichment of CTCs immunomagnetic methods have been widely applied. The AdnaGen test enables enrichment of CTCs using antibody-coated magnetic particles to enrich for tumor cells expressing specific cell surface markers including markers for EMT. This enrichment is followed by RT-qPCR analysis and subsequent determination of CTC numbers by Ct-values (e.g. via cytokeratin expression). The FDA-approved CellSearch® system for CTC enumeration is based on immunomagnetic EpCAM-dependend enrichment of CTCs. Well trained staff is required to evaluate the suggested CTCs based on single channel and overlay images of all three analyzed markers: CD45 (negative selection of leukocytes), EpCAM and Cytokeratin (both for CTC positive selection). Furthermore, an additional marker can be intergration in the CellSearch System such as for example HER2 which allows differentiation of CTC subpopulations of breast cancer (e.g. EpCAM+/HER2− vs. EpCAM+/HER2+). However, all immunomagnetic enrichment methodologies do not enable CTC single cell isolation, which would be needed to increase our knowledge about intratumoral heterogeneity. Some commercially available systems such as a modified VyCAP filter (combined with a puncher device, see above) and most notably the DEParray system (Menarini Silicon Biosystems, Inc) are capable of CTC single cell isolation. At the research level micromanipulation (e.g. CellCelector) and single cell sorting by flow cytometry have also been used to isolate CTCs. The DEPArray uses DEP to transfer single cells (viable or fixed) to single wells for downstream processing. However, selection and detection of target cells is based on immunofluorescence staining. The DEPArray shows the highest grade of automation compared to semi-automated micromanipulators like the CellCelector (Automated Lab Solutions), while flow cytometry is a standard procedure in many laboratories for the detection and isolation of CTCs. It is the fastest method with regard to sample processing and readout and provides data on cell count, cell size and marker expression. One disadvantage of immunofluorescence-based systems is their dependency on CTC pre-enrichment. Therefore, many users combine different methods to characterize CTCs, e.g. CellSearch-Flow sorting, CellSearch-CellCelector or CellSearch-DEPArray.

17Different principles of rare cell analysis are summarized in Table 1.

18Table 1 focuses on “stand-alone” methods (according to manufacturers' specifications) and does not include possible workflow combinations with other technologies. Downstream analysis technologies can be divided into two groups, based on physical properties and based on biological properties of the cells. “Depletion of erythrocytes” means that methods are able to remove erythrocytes effectively; the same is true for “depletion of leukocytes”. “Label-free” or “marker independent” indicates, if a certain method enriches CTCs independent of marker expression (e.g. EpCAM). “Direct quantification” indicates that a technology is capable of enumeration of CTCs without the use of additional devices. For example, CellSearch performs direct CTC quantification while ISET depends on fluorescence staining and microscopy and AdnaGen uses RT-qPCR to quantify CTC marker expression. If the technologies can be implemented in workflows combining other methods to detect, enumerate and characterize rare cells, this is indicated by “Yes”. A detailed overview of CTC enrichment and isolation technologies has been published by.

19The combination of different methods will most likely become the standard for single rare cell characterization in oncology. It will be important to optimize such workflows to generate robust, reproducible and cost-efficient workflows, which can also be used in the clinic.

20Circulating cell-free DNA (ccfDNA) can be isolated from different body fluids, including blood. A passive release by dying cells or active release by secretion are under discussion as sources for ccfDNA. In general, the amount of circulating tumor DNA (ctDNA) increases with tumor burden sums up to 1% of total ccfDNA in early-stage disease and up to 40% in late-stage disease and ctDNA allows detection of a relapse relative early. ctDNA is a valuable biomarker, which is already used for treatment response monitoring or the early detection of relapse. Furthermore, the analysis of ctDNA from patients has an impact on therapy decision (e.g. mut EGFR). In addition to improving therapy selection, the analysis of ctDNA can be used to monitor the success of a given therapy. For example, Murtaza and colleagues were able to monitor early signs of secondary drug resistance when monitoring cancer patients over a time period of 2 years. The results imply clonal evolution during disease progression due to therapy-induced selective pressure. Finally, with the FDA approved Cobas EGFR Mutation Test v2 (cobas, Roche Diagnostic US, Indianapolis, IN, USA) ctDNA analysis reached the milestone to be used as a companion diagnostic (CDx). This test is used as a CDx for non-small cell lung cancer therapy with Erlotinib.

21The size of ctDNA fragements is on average around 160 base pairs (bp). However, there is still an ongoing discussion in the field, whether ctDNA fragments smaller than 100 bp carry relevant information as well. Widely accepted, however, is the fact, that ctDNAs occur fragmented and associated with nucleosomes. Due to the relatively short length of ctDNA fragments and a possibly unequal distribution of released genome fractions, chromosomal aberrations can hardly be detected and even CNVs are difficult to analyze. This has to be considered for other oncogenic alterations, such as chromosomal rearrangements that affect the BRCA1 and BRCA2 genes. Similar to CTCs and their low abundance in the blood, ctDNA concentration is low and therefore sensitive downstream analyses are required. Highly specific and sensitive technologies are needed since allelic frequencies as low as 0.01%, representing only small tumor subclones, might be clinically meaningful e.g. for treatment resistance. Optimization of SOPs, benchmarking of different assays and their implementation in analytical sites also require robust reference material and standards for technology assessment. For example, reference material such as synthetic plasma is commercially available (e.g. SeraCare Life Sciences, USA or Horizon Discovery Ltd., UK).

22In most cases ctDNA is used to screen to point mutations in a targeted approach to – for example - detect known druggable mutations with potential impact on therapy decision. Emerging technologies for targeted approaches with high sensitivity are digital (droplet) PCR and BEAMing (beads, emulsion, amplification, and magnetics). Next generation sequencing (NGS) is already of great value for ctDNA analysis and liquid biopsy (including mRNA and miRNA sequencing). Recently, a 70-gene panel by Foundation Medicine, the FoundationACT® assay, was granted breakthrough device designation by the FDA (http://investors.foundationmedicine.com/news-releases/news-release-details/foundation-medicines-new-liquid-biopsy-assay-granted), potentially making it the first liquid biopsy NGS panel to achieve regulatory approval. NGS is capable of multi-gene analysis including targeted as well as untargeted detection of point mutations. However, the quality of library construction is of high importance, sensitivity is challenging and bioinformatics evaluation is still labor-intensive and has to be harmonized to generate comparable results. Probably best reflecting the need for standards and benchmarking of different NGS panels is a recent comparative study using NGS panels by two different providers that revealed significant discordance in the detection of genomic alterations in overlapping content of both panels. Big efforts are made to improve sensitivity, specificity and to establish an analysis pipeline for proper variant calling, annotation and filter strategies (reviewed in) and development of technologies such as CAPP-Seq may pave the way for routine detection of low allelic frequency mutations, e.g. for detection of minimal residual disease. CAPP-Seq technology has recently been implemented in the AVENIO ctDNA NGS liquid biopsy assays by Roche, demonstrating the rapid commercial adaption of research in the field. Commercial NGS panel providers increasingly try to enter the field of immune oncology with the aim to position their assays for assessing Tumor Mutational Burden (TMB). Yet, to date, there is no agreement on panel size or content nor on the size of genomic regions to be covered to derive actionable information for a recommendation to start or continue immune checkpoint inhibitor treatment.

23Another approach is the determination of CNVs, which is still challenging. However, also here few investigators showed successful CNV determination: recently Molparia and colleagues presented the possibility to screen for copy number variations (CNVs). This allows the use of ctDNA as a (cancer) biomarker not only for the detection of point mutations, but also larger chromosomal aberrations. Detection of epigenetic changes in ctDNA is an additional field of research that receives growing attention.

24Fig. 1 provides an overview of methods used in research or routine diagnostics. The methods are categorized based on the type of genetic alteration (point mutation, CNV or chromosomal aberration). Moreover, it illustrates which methods are currently applied for ctDNA analysis, CTC analysis or routine tissue analysis.

25The use of liquid biopsy is a promising concept to comprehensively characterize a patients (malignant) disease in a minimally invasive way. Therefore, it might be used improve early diagnosis and prognosis as well as disease and/or therapy monitoring. Nowadays, liquid biopsy is becoming more and more included in daily clinical practice. However, so far only a few methods, assays or systems have received regulatory approval. An important issue to be further addressed in the future are limitations for parallel detection and quantification of different analytes (ctDNA, CTC, RNA) from a limited volume of blood which are introduced by pre-analyical procedures. In case of ctDNA and CTCs, the low frequency of target mutations found in a cohort of patients requires a cost-effective (pre-) profiling strategy resulting in (pre-) selection of patients. Finally, reliable data evaluation and data interpretation are still challenging. Easy to use bioinformatics tools need to be developed, standardized and validated in comprehensive studies with defined reference material, to result in clinically useful results and a treatment decision.

26The authors participate in the Innovative Medicines Initiative consortium CANCER-ID. CANCER-ID is supported by the Innovative Medicines Initiative (IMI) Joint Undertaking under Grant Agreement n° 115,749, resources of which are composed of financial contribution from the European Union's Seventh Framework Programme (FP7/2007–2013) and EFPIA companies' in kind contributions.

27The authors are full-time employees of Bayer AG, Germany. T.K. and T.S. are shareholders of Bayer AG.