Skip to content
naulon
Not checkedNot checked for notices yet.

Preparation and evaluation of gypsum plaster composited with copper smelter slag

Masahide Hagiri, Kazufumi Honda

Cleaner Engineering and Technology · 2021

doi:10.1016/j.clet.2021.100084 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Copper smelter slag is a by-product of copper production at smelters. In this paper, the slag was combined with gypsum, and the physical properties and functionalities of the resulting composites were evaluated to explore new uses for copper smelter slag. Hardened composite materials were successfully obtained from slurries consisting of calcined gypsum, copper slag and water, and these exhibited increased flexural strength and bulk density relative to pure hardened gypsum. These enhanced properties were found to become more evident with the addition of higher proportions of slag. The data suggest that such improvements were primarily due to the reduction of air voids caused by the addition of the copper slag. This composite material is likely to provide radiation shielding because of its high iron content, and attenuation simulations indicated the possibility of X-ray shielding. This material was also demonstrated to adsorb hydrogen sulfide but not necessarily other odoriferous gases.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.